XT Tow-Behind Broom



  • High-performance tow-broom for multi-function high-speed snow removal
  • QSX 11.9 Tier 4i EPA certified broom engine
  • Oshkosh heavy-duty, weather-sealed steering axle
  • Heavy-duty mechanical landing gear for storage



  • Optional Oshkosh Smart Pattern compensates for bristle wear to ensure consistent broom pattern
  • Optional ground speed control adjusts broom RPM based upon chassis speed
  • Interactive display with joystick/switches integrated in arm rest
  • Simultaneous multi-function operations with coordinated plow, broom, and air blast movement


  • 46 in. (1168 mm) diameter broom available in 18, 20 and 22 ft. (5.5 m, 6.1 m and 6.7 m) widths
  • Active weight transfer balances weight distribution and ensures proper broom pattern
  • Broom positioning and pattern control from the cab or broom engine enclosure
  • Hydraulic system features clean hose routings and single point access for filter replacement
  • Electronic broom modules grouped in one accessible location
  • Mechanical cooling system is effective and reliable


Download - XT Tow Behind Broom Spec Sheet

Download - Snow Products Brochure

XT Tow Behind Broom Video


  • Fiberglass clam shell design with two doors per side
  • Full-height stainless steel piano-type hinges assures door alignment
  • Wide-open, easy access enables routine maintenance inspection safely from the ground
  • Lighted engine enclosure


  • Dual full-length 16 x 18 in. (406 x 203 mm) steel tubes
  • Modular design enhances serviceability 


  • SAE 2 in. (51 mm) diameter fifth wheel kingpin
  • Adjustable hitch for height variations on chassis
  • Smart Steer rotary positioning sensor is integrated and protected from damage


  • 35° swing angle
  • Sealed slewing ring rotation bearing design
  • Rotation design utilizes dual hydraulic cylinders with internal positioning sensors
  • Hydraulic hoses and electrical harnesses routed cleanly through pivot center
  • Single touch auto cradling/uncradling simplifies operation


Pump Drive and Hydraulics:

  • Funk 59000 with pressurized lubrication system
  • Cyclonic reservoir minimizes volume of hydraulic fluid

Broom Engine:

  • Cummins QSX 11.9, in-line 6 cylinder, 4 cycle
  • Displacement - 729 in³ (11.9L)
  • Horespower - 385 @ 1,800 rpm
  • Peak torque - 1,350 lbs.-ft. @ 1,400 rpm
  • Governed rpm - 2,250
  • Heated fuel/water separator

Broom Core:

  • 18 ft. (5.5 m) wide
  • Poly SIB cassette bristles
  • 46 in. (1,168 mm) diameter


  • 630 rpm with 4024 lbs.-ft. of available torque at the broom shaft
  • Oshkosh weight transfer system
  • Dual end drive with 5:1 planetary gear drive
  • Oil bath core center bearing
  • Broom oscillation of 8°
  • (4) 180/70 R8 casters


  • Oshkosh® Command Zone LCD display on adjustable arm
  • Oshkosh Smart Pattern for automatic broom pattern adjustment (optional)
  • Automatic ground speed control (optional)
  • Single joystick control and switches integrated into armrest
  • Control panel for basic broom functions is located at the rear, accessible from ground

Axle and Steering:

  • Oshkosh designed and manufactured
  • 26K capacity steering axle
  • Sealed ball end and cage ring design protects axle end from dirt and moisture
  • Oshkosh Smart Steer controls the rear axle steering angle to coordinate broom tracking with plow
  • Auto centering aligns aligns rear axle when vehicle is placed in reverse
  • 445/65 R 22.5 tires
  • ABS equipped axle for controlled braking in all conditions
  • Commonality with Oshkosh chassis axle components

Electrical System:

  • Lighting and starting - 12V
  • Battery - (3) 12V
  • Alternator 200A


  • LED stop, turn, brake and marker lights
  • Work lights inside engine compartment
  • Optional amber AOA light
  • Optional LED and HID work and spot lights

Fuel Section:

  • Dual 80 gallon (302.8 L) fuel tanks
  • DOT certified
  • Fuel level sensors in each tank and level indicator in Command Zone screen

Cooling System:

  • Radiator core is fin and tube type with de-aeration system
  • Mechanical fan clutch thermostatically controlled
  • Silicone radiator hoses with constant torque clamps
  • Spon on coolant filter


  • Broom engine - QSX 11.9 L with up to 500 hp, 1,600 lbs.-ft.
  • 20 and 22 ft. (6.1 and 6.7m) head widths (4 casters)
  • 45° swing angle
  • Wafer style bristles
  • Wire. poly, 50/50 wire/poly bristles
  • Snow shedding hood with one touch control
  • Auxiliary engine oil heater
  • Hydraulic oil heater
  • Broom head vibrator
  • Dual forced air blowers
  • Rear mounted full LCD display with enhanced broom controls and diagnostics
  • On-board battery charger (20A self regulating)
  • 270A alternator
  • Single side fuel fill
  • Centralized rear drain kit for engine fluids
  • Color rear view camera with in-cab monitor
  • Chassis integration packages including ballast, fifth wheel hitch, trailer air and electrical systems
  • Spare wheel and tire

SIB Brushtech

The SIB Cassette Brush System is the premier sweeping system for keeping airport operational areas and highways clear of ice, snow, rubber, sand and F.O.D. (Foreign Object Debris). The SIB core and cassette are adapted to one another for optimal function and maximum life cycle.

For more information visit the SIB Brushtech Page

We have dealers all over the world.

Experience the Oshkosh Difference for yourself.
It all begins when you contact your nearest dealer.


Find A Dealer